🌱 Ministry of Agriculture registered fertilizers · 🚚 Fast shipping to all 81 provinces of Türkiye · 🏭 Direct from the producer, factory prices · 🎁 50 ₺ welcome coupon for members
Home›Blog›Application Guide

Application Guide · 2025-04-28 · 7 min read

Fertilizer Compatibility in Fertigation: Feeding Without Clogging the Tank

Fertigation (fertilizing through the water) is the backbone of the modern greenhouse; it delivers nutrients right to the roots, right on time. But this system has three unseen rules: fertilizer compatibility, EC and pH. If these are neglected, yields fall and the system clogs up.

1. Fertilizer compatibility and the risk of precipitates

Not every fertilizer can be mixed in the same tank. The most critical rule: do not mix calcium fertilizers with sulphate fertilizers (potassium sulphate, ammonium sulphate) or phosphate fertilizers (MAP, DAP) in the same concentrated stock tank. This mixture forms an insoluble precipitate (similar to gypsum) that clogs the drippers. The solution is the A and B tank system: fertilizers containing calcium go into tank A, and those containing sulphate and phosphate go into tank B; they only meet once diluted in the irrigation water.

2. EC: managing salinity

EC shows how "concentrated" the solution is. A low EC leaves the plant hungry, while a high EC leads to root stress, flower drop and yield loss. As a general rule, an upper limit of around 2.5 dS/m in the soil is observed (higher for some tolerant plants). If EC has risen, leaching with clean water and drainage come into play.

Practical routine: Start irrigation with plain water, add the fertilizer in the middle, and finish by flushing the line with plain water again. This both improves uptake and prevents residue from building up in the drippers.

3. pH: the key to availability

pH should be kept within the 5.8-6.5 range. Outside this range, the plant cannot take up the fertilizer even if it dissolves perfectly in water; micronutrients in particular become locked up at high pH. The pH of the irrigation water should be measured regularly and adjusted if necessary.

Chloride-sensitive plants

Plants such as grapes, citrus, tomatoes, potatoes and tobacco are sensitive to chloride. For these crops, chloride-free sources (potassium sulphate, potassium nitrate, MKP) are preferred over potassium chloride (MOP) as the source of potassium; otherwise quality suffers.

Choosing the right fertilizer

For fertigation, products that dissolve completely in water, leave no residue, contain nitrate nitrogen and are rich in micronutrients are ideal. Organic and organomineral liquid products, when chosen in a drip-compatible form, also support soil health along with feeding the plant.

Drip-compatible organomineral

Sol Power, a liquid fertilizer that can be applied safely through drip irrigation.

View product
Ministry RegisteredOfficial registration on every product
Shipping to 81 ProvincesDelivered by courier and freight
Direct from the ProducerFrom our own facility in Giresun
Expert SupportQuick answers to your questions