🌱 Ministry of Agriculture registered fertilizers · 🚚 Fast shipping to all 81 provinces of Türkiye · 🏭 Direct from the producer, factory prices · 🎁 50 ₺ welcome coupon for members
Home›Blog›Application Guide

Application Guide · 2026-05-31 · 9 min read

How to Read a Soil Analysis Report

Soil analysis is the only sound way to choose fertilizer based on need rather than habit. But the pH, EC, lime, organic matter and dozens of nutrient values in the report from the laboratory are useless if they are not read correctly. In this guide, we explain how to turn the report into "field decisions".

First, the right sample

An analysis is only as good as the sample. An incorrectly taken sample will give the wrong result even in an excellent laboratory. The basic rules:

Key parameters in the report

1. pH: soil reaction

pH is the degree of acidity/alkalinity of the soil. Most crops prefer a slightly acidic to neutral range (roughly 6–7.5). If the pH is too high (alkaline/calcareous), micronutrients such as zinc, iron and manganese become locked up; if it is too low (acidic), other problems arise. In other words, pH is the master key that determines which nutrients are available.

2. Lime (CaCO₃)

High lime content makes micronutrient uptake difficult. In calcareous soils, iron and zinc deficiencies can appear because the nutrients cannot be taken up, even when there is no "true deficiency". In this case, micronutrients should be applied in chelated form or as a foliar spray.

3. EC: salinity

Electrical conductivity indicates the salinity of the soil and is a stress factor for plants. A rough classification:

4. Organic matter

This is the soil's carrying capacity. It holds water, stores nutrients and feeds microorganisms. Most soils in Türkiye are poor in organic matter (often below 2%). If this value is low, raising organic matter with organic/organomineral products is just as important as fertilizing.

5. Macronutrients: N, P, K

Phosphorus (P) and potassium (K) are usually planned as base applications. Nitrogen (N), on the other hand, is unstable in the soil and can be leached by rain; that is why it is better to split it (spread it over several applications). Note: the nitrogen value in a soil analysis can be misleading; leaf analysis gives a better picture of nitrogen status.

6. Micronutrients: Zn, Fe, Mn, B

Elements such as zinc, iron, manganese and boron are needed in small amounts, but deficiencies seriously reduce yield. Because their availability is strongly affected by pH and lime, read the value in the report together with pH, not on its own.

Watch out for the unit trap: the same nutrient may be reported as mg/kg, ppm or % in different reports; micronutrients are measured by different methods (e.g. DTPA), and each method has a different critical threshold. When reading a value, check both the unit and the method.

Turning the report into decisions

A step-by-step logic makes the job easier:

  1. pH + lime: First understand the soil's reaction; this is the framework for everything else.
  2. EC: Is there salinity stress? Plan crops and irrigation accordingly.
  3. Organic matter: If it is low, strengthen the base with organic/organomineral products.
  4. Macro plan: P and K as a base application, N in split doses.
  5. Micro strategy: If pH/lime is high, use chelated or foliar micronutrients.

Conclusion

Soil analysis is a roadmap that lowers fertilizer costs and reveals the real factor limiting yield. What matters is not looking at the numbers one by one, but reading them in relation to each other. If you are unsure when interpreting your report, you can consult us with your results, and together we can plan an organic and organomineral programme suited to your soil.

Unlock your locked-up soil

Liquid Organic Fertilizer opens up soil locked up by chemicals and restores its structure.

View product
Ministry RegisteredOfficial registration on every product
Shipping to 81 ProvincesDelivered by courier and freight
Direct from the ProducerFrom our own facility in Giresun
Expert SupportQuick answers to your questions